FCI Load Tracker
Self Adjusting
• One Size Fits All
• Closed Core CT Design
• Manual Test and Reset
Load Tracking capability allows utilities to use one fault
indicator for all requirements without concern for coordination studies. The Load Tracker Faulted Circuit Indicator represents state of the art closed core design technology. The Load Tracker offers the highest degree of proximity immunity available. Underground circuits that require automatic reset fault indicators have cable spacing constraints that require a high degree of immunity from adjacent cable circuits. In many cases false trip or reset conditions can occur that will adversely affect FCIs that are sensitive to and dependent on load current for reset. The Load Tracker Fault Indicator offers the highest degree of immunity while still being able to sense and reset on current.

Hotstick applied, one size fits all, close proximity immunity, the ultimate answer to UG fault locating.

FCI 222 Series Type M
Underground
· Automatic Time and Manual Reset
· Self Power
· Armed and Ready
FCI 222 Series Type M is a self powered fault indicator for use on underground distribution circuits. Fault registration is evidenced by a flashing red light emitting diode located either directly on the FCI device or remotely visible up to 100 feet via fiber optic cable. The unit is powered by a non-replaceable long life lithium oxide cell that is encapsulated in epoxy resin for consistent reliability to 15 feet of submersion. Automatic reset is accomplished by time passage of 2 or 4 hours. Trip levels are discrete and factory adjusted to the customers requirements from 100 to 2000 amps. Trip speed is selectable from one of three time current curves. These curves are defined as D (delayed), U (undelayed) and D/U (delayed/undelayed). Please refer to Time/Current Curves in the applications section of the catalog for precise timing curves.

ACOUSTIC FCI
LOAD TRACKER
• Audible Sounding Indication
• Hot Stick Applied
• Manual Test and Reset
• Self Adjusting Trip Rating
The Acoustic Fault Indicator emits a loud beeping sound to indicate faults. This unique indication is especially useful in locating faults when equipment is covered with snow. The sounding indication eliminates the need to dig out equipment just to get a visual of the indicator thus saving effort and time. Load Tracking technology automatically sizes the Fault Indicator so it is properly sized for every circuit application.

Mechanical Faulted Circuit Indicators

FCI Underground
Mechanical Rotor Type
· Reliable (50 Years of service)
· Economical URD Indication
· Easy to install
· Manual reset
· Factory set trip level
The economical and reliable design was the first FCI ever produced and consists of a closed core yoke attached to the indicator housing. The indicator housing contains a rotor which is painted two colors, one red for tripped indication and one black for non-tripped.

FCI Underground
Mechanical Submersible Rotor
· Water Tight
· Economical URD Indicator
· 200A to 2000 A Trip rating
· Use on Overhead Applications for Nuisance Trips
The Submersible FCI consists of a yoke with an attached indicating housing. The water tight indicating housing uses a rotating disk to indicate fault and is reset manually by an attached reset magnet. The metal components are all stainless steel.